The Speier outlets have the function of connecting the waterproofing mantles with the rainwater drains placed close to the walls through the corner fittings provided with a watertight seal.
They can also be used as vertical drains. They are equipped with a smooth flange to facilitate bonding with the waterproof covering.
The shank has a length of 500 mm and is able to cross a wall of 45 cm.
They are compatible with prefabricated mantles in TPO. For better gluing, the nozzle must first be cleaned, especially from any oil deposits.
The flange is equipped with holes for mechanical fixing to the slab and to the wall. The mechanical characteristics remain unchanged over time.
The GENESY ECO TPO angle outlets have the function of connecting the synthetic waterproof membranes in TPO with the rainwater drains placed close to walls. They have a rectangular or square section for a rational water disposal.
The flange with respect to the shank is slightly inclined to facilitate the sloping installation of the nozzle.
They are equipped with a smooth flange to facilitate gluing with TPO synthetic waterproofing membranes; they are available in two versions with rectangular section of 65x100 mm or square of 100x100 mm. The shank has a length of 425 mm and is able to cross a wall of 40 cm. The elastic material with which it is built guarantees durability. It is advisable to carefully clean the nozzle and the synthetic covering near the gluing area. The angular nozzle can be used both with horizontal and vertical drains.
Resist the degradation caused by the sun, ozone and other atmospheric or chemical agents, normally present. They have a high flexibility even at low temperatures. The mechanical characteristics remain unchanged over time. They are compatible with synthetic prefabricated membranes in TPO.
